Linear waves flowerpot, a 3D model for printing on a 3D printer made of plastic. In formats .obj and .stl with the ability to edit and resize a three-dimensional object to fit your intended dimensions of indoor or outdoor plants. 

Size 3d model:

height - 240 mm;

width - 200 mm; 

Top - 200 mm.

The stylish design and the ability to design a matrix in CAD systems based on the original 3D model will allow you to cast large outdoor products or by enlarging the model in a slicer, dividing it into several parts, and after printing, gluing and post-processing.

The Egyptian Sphinx cat is a 3D model for printing on a 3d printer in stl format of good quality at an affordable price. A large number of deities were associated with cats in ancient Egyptian mythology, sphinx cats were no exception and were considered sacred animals associated with the goddess Bastet.

Many Egyptian statues and parchments depict cats with the same large ears and muscular physique as modern sphinx cats.

Dimensions of the 3d model:

• Height - 375 mm;
• Depth - 137 mm;
• The width is 209 mm.

You can set the 3D printing settings at your discretion - it all depends on your experience, suggestions follow from our side:

• Layer height: 0.2mm - 0.14mm;
• External walls/perimeters: 2;
• Lower layers: 3;
• Top layers: 5;
• Filling: 15%;
• Minimum layer time: 5 seconds;
• Perimeter Generator: classic;
• Supports: Desirable.

Decorative figurine (statuette) of a New Year's deer is a 3D model in stl, obj format for printing on 3D printers in high quality. Perfect for decorating the interior of your home.

It is allowed to use copper or silver anodizing technology after 3D printing and deposition of the model with a conductive layer.

Model Size:

• Height - 280 mm;
• Width - 110 mm;
• The depth is 68 mm.

Recommendations for 3D printing:

• Material: Plastic for 3D printer ERYONE PLAY Silk Gold;
• Layer height: 0.2 mm;
• Support services: Yes;
• Filling: Grid;
• Filling density: 15%.

Decorative deer figurine is a 3D model for printing on a 3D printer in stl at an affordable price, with a high-quality elaborated polygonal grid. It is perfect as an interior piece for your home. It is also allowed to process the printed statuette with a conductive layer for subsequent anodizing and coating with a metal layer of copper, silver or other metals.

3D Deer Dimensions:

• Width - 106 mm;
• Height - 206 mm;
• The depth is 60 mm.

Approximate slicer settings when printing a deer model on a 3D printer:

• Size : 106 x 206 x 60 mm (can be scaled at your discretion);
• Layer height : 0.2 mm ;
• Perimeters : 2-3;
• Filling : 15%;
• Printing time : ~3 hours ;
• Printing speed : 30 mm/s (not fast, but stable and high-quality);
• Adhesion to the table : it is recommended to use PVA glue or an 8 mm rim for better adhesion to the table;
• Supports : yes (print with supports);
• The upper contact Z is the distance of the supports : 0.20 mm.

3d model of a Boeing 747-8 wide-body elongated aircraft in 1:144 scale for 3D printing. Developed by Boeing Commercial Airplanes, it is the largest modification of the 747 model of its kind. After the release of the 747-400 model, the company considered larger versions of the 747 series as an alternative to the Airbus A380.

The 747-8 airliner was launched on November 14, 2005. The first 747-8F Freighter made its maiden flight on February 8, 2010, and the passenger 747-8 Intercontinental followed suit on March 20, 2011. The cargo version was first delivered in October 2011, and commercial flights of the aircraft began in June 2012. Production of the 747 ended in December 2022, and the last 747-8F will be delivered to Atlas Air in early 2023.

Model Dimensions:

• Length: 52.2cm;
• Wingspan: 47.2 cm;

You can set the 3D printing settings at your discretion - it all depends on your experience, suggestions follow from our side:

• Layer height: 0.2mm;
• External walls/perimeters: 2;
• Lower layers: 3;
• Top layers: 5;
• Completion: 15% (excluding the fuselage of the front section, fuselage cf.art. and struts: 25%);
• Minimum layer time: 5 seconds;

Perimeter Generator: classic Check out the visual recommendations shown below for the purpose of high-quality assembly of 3D printed models: